WITTMANN BATTENFELD will present to trade visitors latest machine and process technology together with automation and auxiliaries for plastics injection molding at the Chinaplas in Guangzhou, the largest trade fair specializing in plastics in the Asian region, at booth 4.1C01.
The Asian market is one of the most important markets for the WITTMANN Group. In China, the WITTMANN Group is not only present with a sales subsidiary of its own, but also produces robots and auxiliaries for the local injection molding industry. Most of these products are destined for the Asian market. The articles manufactured at the production plant in Kunshan include robots, temperature controllers, material loaders and granulators.
At this year‘s Chinaplas in Guangzhou, WITTMANN BATTENFELD will demonstrate an LSR application from the automotive sector on a machine from its all-electric EcoPowerseries. The machine is an EcoPower160/350 with 1,600 kN clamping force, equipped with LSR technology from Nexus, Austria. The injection unit in open design allows easy integration of the LSR feeding and blending elements. A connector seal for the automotive industry will be produced from LSR supplied by Momentive, Germany with a fully automatic 32-cavity mold equipped with an inspection system from Nexus. The system uses latest cold runner technology supplied by the mold maker with the TIMESHOT needle shut-off control for molds with large numbers of cavities, which is unique on the market. A gripper with a sensor system takes care of automatic parts demolding.
On the second injection molding machine shown at the Chinaplas, a MicroPower15/10, a medical clamp with a part weight of 0.003 g is manufactured from POM supplied by Ticona within a cycle time of 5 seconds on a MicroPower 15/7.5with a 4-cavity mold from Microsystems UK. The parts are removed by a W8VS2 WITTMANN robot – a robot which has been specially designed for the highly dynamic and precise removal of small and micro parts – and passed on to a camera integrated in the production cell and in the machine’s control system for quality inspection. The parts are subsequently separated according to cavities and stacked in a stacking module. In this application, the parts are injected, tested and deposited in the clean room.
Furthermore, the WITTMANN group will demonstrate at the Chinaplas the integration of robots and peripherals into the UNILOG B8 control system with the help of an interactive display panel. This display panel will give visitors the opportunity to test directly on site the advantages of the WITTMANN solution to meet the challenges of Industry 4.0, known as WITTMANN 4.0.
WITTMANN automation and auxiliaries
In addition to the robots and auxiliary appliances integrated in the injection molding machines, the WITTMANN Group will present at the Chinaplas a wide range of robots and auxiliary appliances as stand-alone solutions. The majority of the products exhibited will come from the production plant in Kunshan/China.
In the area of automation, robots for smaller injection molding machines will be shown, namely W818TS robots, a PRIMUS 14S and a PRIMUS 16S. These robots recommend themselves primarily by small moving loads and high dynamism for applications in the clamping force range of up to 3,000 kN, thus making for extremely short parts removal times. Moreover, a W838T will be on display. The W838T is the first Asian model which reflects the design vocabulary of the European WITTMANN pro series. The designers of this appliance have successfully increased the robot’s rigidity to offer their customers a compact, powerful parts removal device.
From the range of temperature controllers, three models from the low-cost TEMPRO basic C series will be presented, that is, a TEMPRO basic C90, a TEMPRO basic C140 and a TEMPRO basic C120M. The first two appliances are single-circuit temperature controllers with indirect cooling for maximum temperatures of 90 and 140°C respectively and a standard heating capacity of 9 kW. The TEMPRO basic C120 is an appliance with direct cooling and extremely compact dimensions. Its maximum heating capacity is 18 kW. In addition, a single-circuit and a dual-circuit model from the powerful TEMPRO plus D series will be showcased, namely a TEMPRO plus D160 and a TEMPRO plus D180. The TEMPRO plus D appliances are easy to operate via a self-explanatory touch display. Numerous options make it possible to configure these appliances for virtually all applications found in the plastics industry. Cooling water flow controllers will also be shown at the Chinaplas.
The WITTMANN range of granulators will also be present at the Chinaplas. On display will be the MAS grinder model MAS 2A, two granulators from the G-Max series, a G-Max 12 and the high-performance G-Max 33, as well as two granulators from the new S-Max series, an S-Max 2 and an S-Max 2 Plus. The models from the S-Max series are slow-running granulators for in-line recycling of sprue consisting of hard and brittle engineering plastics.
Moreover, WITTMANN BATTENFELD will exhibit two ATON segmented wheel dryers at the Chinaplas. The segmented wheel in this type of dryer consists of a large number of compartments loosely filled with dessicant balls. In combination with the innovative 3-Save process, this enables optimal energy utilization, together with a continuous drying process with a constant low dew point.
WITTMANN BATTENFELD will demonstrate its expertise in the area of materials handling with the stand-alone loaders FEEDMAX S 3 and S 3 net and a central material separator from the FEEDMAX B series. Both types of material loaders stand out by their maintenance friendliness, high process reliability and easy operation.
The blenders the company plans to exhibit are a GRAVIMAX G34 gravimetric blender and a volumetric DOSIMAX blender. The GRAVIMAX is equipped with wear-resistant, high-precision stainless steel valves. Its metering accuracy is ensured by RTLS technology (real-time weighing). Throughout the entire metering cycle, two weighing cells are active, which measure the material with high accuracy down to a single gram and consequently ensure consistent parts quality with every shot.
The WITTMANN Group
The WITTMANN Group is a worldwide leader in the production of injection molding machines, robots and peripheral equipment for the plastics processing industry, headquartered in Vienna/Austria and consisting of two main divisions: WITTMANN BATTENFELD and WITTMANN. They jointly operate the companies of the group with eight production plants in five countries, and its additional sales and service companies are active with 34 facilities on all important plastics markets around the world.
WITTMANN BATTENFELD pursues the further expansion of its market position as an injection molding machine manufacturer and specialist for state-of-the-art process technologies. As a supplier of comprehensive, modern machine technology in modular design, the company meets both present and future market demands for plastics injection molding equipment.
The WITTMANN product portfolio includes robots and automation systems, material handling systems, dryers, gravimetric and volumetric blenders, granulators, temperature controllers and chillers. With this diversified range of peripheral units, WITTMANN offers plastics processors solutions to cover all production requirements, ranging from independent production cells to integrated plant-wide systems.
The syndication of the various segments under the umbrella of the WITTMANN Group has led to complete connectivity between the various product lines, for the benefit of plastics processors with an increasing demand for seamless integration of processing machinery with automation and peripherals.
In China, the WITTMANN group is present with its own production facility in Kunshan and its sales and service subsidiary, WITTMANN BATTENFELD (Shanghai) Co., Ltd., also based in Kunshan, as well as additional offices in Shenzen, Tianjin, Chengdu and Changchun.